Description
Usage:
Prepare the paint surface by thorough and safe washing
Then carry out a complete chemical-mechanical decontamination of the paintwork
prove the paintwork with at least a one-step refreshment, eg Bad Boys One Step Polishing Paste
Before application, thoroughly degrease the paint surface with Bad Boys Panel Wipe (preferably twice)
Apply the coat on a cool and dry paint surface, in a room with constant thermodynamic conditions without sunlight.
Using a clean, dry applicator, apply a small amount of RRCeramic Coating Ultra and spread the product in a cross motion over the surface.
Depending on the temperature, wait about 30-60 seconds to remove the excess coating with a proper microfiber (the coating quickly bonds with the paint surface, so a few additional microfiber towels will be needed)
Use another microfiber to polish the surface until it is shiny without streaks (using an inspection flashlight will help)
After the application is finished, leave the car in the optimal temperature environment (not less than + 10°C) for 24 hours, for better “ bonding ” of the coating to the paint surface
Directions for use:
Use only the dedicated RRC applicator for the safest application
Remember about good lighting
The second layer should be applied after 10 ~ 12 hours from the moment of applying the first layer or after preheating it with the IR lamp
Maintain the coating by safe hand washing at least once every two weeks
Recommendations:
Avoid moisture in the first 24 hours after application
Protect the car against harmful external conditions for the first week after application, until the coating is fully cured
After the coating has hardened, the car must be safely washed (control washing) in order for the coating to acquire antistatic properties.
Take care of your car and prevent the accumulation of dirt on the paintwork at all costs during the hardening process. (Leaving heavy contaminants on the surface will prevent the coating from hardening properly. Safe washing is much less harmful to a fresh coating than leaving accumulated dirt on it)
Always make sure the surface is cool to touch and the working area free of sunlight and gusts of wind
Store in tightly closed original packaging in a dry and cool place, avoid frost and overheating
Always use appropriate protective clothing
Attention:
Do not wash the insufficiently cured coating in any way
Do not apply the coating on a damp or heated surface and in a room with a temperature below + 10 ° C
Do not use the product on a hot surface or direct sunlight
Reviews
There are no reviews yet.